24hr Vulcanizing Shops in Cebu

This topic will be updated everytime I would find something to add on the list... For me knowing a reliable vulcanizing shop is very essential, especially when travelling with the family. This also comes handy not just on the unfortunate time that we get a flat tire but also during preparation. Let say its Friday, last day of regular work week.. The family is going on a holiday road trip to see the Butandings in Oslob.. This means that you have to leave the city early that you would need to arrive in Oslob before 8am (Whale Shark viewing is best before 10 AM). So after work, you did a little grocery with wifey, now when you reached home and checked the car you found out that the spare tire is bad..blah..blahh... blahhhh.... this is just some real life examples where knowing some 24hour V-Shops nearby helps..

I live in Lapu-Lapu City.. Nap and Alvin Vulcanizing Shop is located in Pusok, Lapu Lapu City... They have been my refuge when needing tire repair services. (They were stationed somewhere in Pajo before, now transferred few months ago in this new location.)

View across the street..:)

Heres another 24hour vulcanizing shop located Subangdaku. Their spot is near Northbus Terminal.

WILL ADD MORE SOON!!!

electrical taping exposed wires on my XR200

So i got 3 days off this week, so I thought of fixing my motorcycles ignition... The job was really easy but it got pretty tough because of my little assistant that keeps on jumping at my back while soldering..

After connecting the ignition wires I saw few exposed cables. I have an old XR200 Honda so this was a by product of age and abuse:).. so electrical taping is essential to avoid short circuits.

Here are some tips I learned from an old buddy who works at CFG Banilad. Same technique was also used by another electrician who rewired my bike when I tore it down few years back.

Picture below is quite simple to understand:) So what you need is to transfer or roll the electrical tape to another smaller roll:)

I use 3M Electrical Tapes all the time:)

Sample 1.

comes handy when insulating wires too:)

Sample 2.

this is the bikes main harness.. take the  old tape and re-tape

Sample 3.

Advantage of using this practice is that you avoid the annoying thing that happens when you cut the tape first then tape.. yup! it sticks anywhere.. when this happens the tapes sticky part would accumulate dust.. Hope this helps!

Daddy's advise when working with little kiddo's is to do a visual check before using them bikes.. You might have some toothbrush stuck somewhere...

DIY: Changing the lower arm assembly of your Suzuki Multicab

These pictures should be easy to follow. Then again, when buying the lower arm assembly, bring a sample to avoid getting the other version. When doing this procedure, always make sure to practice "SAFETY". Use good jacks and as a precautionary measure use your spare tire and put it under just incase the jack fails:(

Change Oil??? I let the Shell dudes handle it..

Hassle free change-oil??.. Drop by any gas stations nearby. I usually do mine in Shell Gas station in Basak-Mandaue. They offer packages depending on the budget you have. I good with the 1250 package (Suzuki multi-cab); this includes 3 liters of Shell Oil and the oil filter (Vic Oil filter brand is already a good brand).. there will be extra charge if you want flushing. And yes they have free coffee:)

You can ask their attendants to check your gear oil too.. :)

Suzuki Multicab Steering problems??? hmmm.. this may help...

(readers>> i'm no mechanic so terms or used words may not be technically correct )

We own a Suzuki Srum van, this probably has served us for almost 10 yrs now. This van has been thru a lot but has never failed us (i think).. But of course over time this car has given us, mainly me:) some headaches since I am in-charge when it comes to car repairs and maintenance. 

If by chance you are experiencing any steering issues, like tire mis-alignment; crappy underchasis sounds when passing thru crappy streets and steering rattles.. chances are you have some steering issues. It maybe some rubber bushings that needs replacements: lower arm assembly bushing isssues, center post bushing replacement or rack-end overhauls.

My go to guy is Jesse. Before he was assigned in a shop across Toyota Tabok Mandaue, owned by Mr. Alan Choachuy. Currently he is now at the Aldo Goodyear Servitek before reaching Canduman. 

Tips:
Centerpost issue - Centerpost bushing replacement can be purchased in Tri-J (Mandaue - Tabok branch). I forgot how much it cost me but I think it was not more than 350. 

Lower Arm Assemly - When buying one be sure to bring a sample. Based on 2 separate purchases I always comeback returning the wrong item. There are 2  types:) 

Rack End - If this needs overhauling, Boss Jesse will point you to a machine shop nearby. They charge I think 600 or 800 for the oil seal for both sides. Boss Jesse will be dismantling the assembly for you. 

Charges are cheap, at around 250 to 350 depending on what the issue is. If you want things done in one day, get to the shop early like 8am.

 

purpose of this site...

Good Day to all reader.. this site is solely created to help others get things done when you are in Cebu. I will be blogging based on some things that I will be facing or things that I find other daddy's should know. Whether it be the nearest 24hr vulcanizing shop (if ever i get a flat tire in the middle of the night), the nearest Sr. Pedro Lechon Manok branch or  maybe a simple direction to the nearest Police station.

I got load of stuff that I wanted to share but I have not organized them yet. I also wanted to make these topics clear and short. I may have to outline the topics like:

Daddy wants some painting done.
loading resources....

option1: bugrock 888 in Lamac Consolacion
option2: good old friend Alex in Sangi, LLC

something like this perhaps..

Another example would be, let say I needed some Calamansi seedlings (done this before)

Then I would say, I got this great deal somewhere in Sudlon, Maguikay. I met this guy in somewhere.. and he introduced me to someone who has some healthy, thornless Calamansi seedlings for only 65 a piece...

***picture to follow